Why does my TP-Link Say No Internet connection?

If so, the router is not able to communicate with your modem and you can’t access the internet. To resolve this problem, we need to change the LAN IP address of the router to avoid such conflict, for example, 192.168. 2.1. You may login the web interface of your TP-Link router and then go to Advanced > Network > LAN.

Why is my TP-Link wifi router not working?

There are various causes of this kind of problem: too weak wireless signal, incorrect wireless settings on the router, or too much interference and problems of the wireless adapter. Try the following solutions: a. Check the wireless signal strength of your network.

How do I fix my modem not connecting to the internet?

Troubleshooting routers and modems

1. Test your Wi-Fi on different devices.
2. Restart your modem and router.
3. Try a different Ethernet cable.
4. See who’s using your Wi-Fi.
5. Upgrade your equipment.
6. Call your internet service provider.
7. Reset your router to default settings.

What to do if TP-Link is not working?

Contact TP-Link support and tell us the wireless security type and model number of your router/access point. 1) Connect other wireless devices to the router and make sure the internet is working with other devices. 2) Check IP address, Default Gateway, and DNS of Wireless (Wi-Fi) Network Connection.

What lights should be on TP-Link?

Usually, TP-LINK powerline adapters have three LED lights: First one stands for power; Second one stands for powerline connection; Third one stands for Ethernet connection.

Why is my modem not connecting to my router?

Reboot the Router the first thing you’ll want to do is try and restart your router. It is quick and easy to reboot your router. Usually, you just unplug the power cable, give it a couple of seconds, and then plug it back in. If your modem is separate, you might also want to do the same with your modem’s power source.

How do you check if TP-Link is working?

Launch a web browser, visit http://tplinkrepeater.net or http://192.168.0.254 and log in with the password you set for the extender. 2. Go to Settings > Status to check the internet status of your extender. If everything is OK as shown below, your extender is successfully connected to your router.

Why my modem WiFi is not working?

There are a lot of possible reasons for why your internet isn’t working. Your router or modem may be out of date, your DNS cache or IP address may be experiencing a glitch, or your internet service provider could be experiencing outages in your area. The problem could be as simple as a faulty Ethernet cable.

How can I test my TP-Link router?

Step 3, Turn on the TP-Link router as long as the modem booted up. Then you can test the internet connection from the TP-Link router. If it is still the same, please connect your computer to the modem directly, bypass the TP-Link router and verify whether it can access internet.

What to do when your router says red light on?

Re:Router red light on and can’t find internet -Solution. Try to power cycle these two devices first. Step 1: power off the router and modem both. Step 2, turn on the modem only and wait 1-2 minutes to make it restart. Step 3, Turn on the TP-Link router as long as the modem booted up.

Why is there no light on my Ethernet modem?

The ethernet cable is good otherwise there would be no light on so you can rule that out. Check you modem and make sure all lights on it are on normally. If you have a cable provider you can try to powering the modem off, disconnecting the Coaxial cable, then power the modem back up. Wait 3-5 minutes before you reconnect the coaxial cable.

What does the orange light on my modem mean?

An orange internet light indicates there is a problem with the connection to the ISP. If you log into the router you will usually see 0.0.0.0 as you internet/WAN IP address. The ethernet cable is good otherwise there would be no light on so you can rule that out. Check you modem and make sure all lights on it are on normally.