What do I do if my beats pill wont charge?

Reset and delete settings

1. Use the Lightning-to-USB cable to plug your Beats Pill+ into a power source.
2. Turn the speaker on.
3. Hold down both the “b” button and the power button for six seconds. The Fuel Gauge flashes red six times. Your Beats Pill+ is now restored to the settings it had when you purchased it.

Why is my beats pill making a static noise?

If you have ever noticed that when your smartphone, tablet, or bluetooth speaker is low on battery that it will either not pair with your devices or produce a crackling, static sound, that’s because the bluetooth is requiring more power in order to operate.

Why is my beats pill blinking red?

Charge Beats Pill+ When you turn the Beats Pill+ on or off, the Fuel Gauge lights blink to show how much charge is left in the battery. When the battery in your Beats Pill+ has less than 10 percent charge, the first Fuel Gauge light blinks red.

Why are my beats not charging?

Make sure your headphones are not plugged in to your USB charging cable. Press and hold the power button for 10 seconds. Release the button. The battery Fuel Gauge LEDs will all blink white, then the first will blink red—this sequence will happen three times.

Why is my beats volume so low?

Having a loose connection between the audio socket of the media player device and the headphone plug can cause problems such as weird static noises or the sounds being too soft. One factor that can affect the overall connectivity between these devices is having dirt or debris on the headphone jack/audio port.

Why does my Beats Pill keep disconnecting?

This is probably caused by feedback between the speaker device and the microphone in your cellular device. To solve this, it might be best to use your phone as a Bluetooth device to connected with the Beats Pill from a distance or use a longer ⅛” stereo audio cable to connect with it from further away.

How do I make my Beats Pill louder?

To use Amplify mode, follow these steps:

1. Download and open the Beats Pill+ app on your iPhone, iPad, iPod touch, or the Beats app on your Android device.
2. Make sure that one Beats Pill+ is turned on and connected.
3. Make sure that the second Beats Pill+ is turned on and discoverable.
4. On your device, tap Amplify.

Can you fix a Beats Pill?

If your product fails because of a manufacturing defect in the battery and it’s still covered by the Apple One Year Limited Warranty or consumer law, we’ll either repair your product or replace it. If your product was damaged accidentally or needs other repairs, you might need to pay an additional fee for service.

Do beats light up when charging?

When unplugged from power source: 5 white lights signal full or near-full charge. 1 solid red light signals low charge. 1 flashing red light signals battery is near depletion.

What to do if Your Beats Pill won’t charge?

Beats Pill 2.0 Battery Replacement (Beats Pill won’t turn on or charge) – YouTube My repair of a recent Beats Pill 2.0 that did not want to charge anymore.

How much does it cost to repair a Beats By Dre?

After examining your Beats, your technician will confirm the total costs for repair or replacement. The prices for damage, battery service, and lost Beats are for repairs made by Apple. Pricing and terms might vary at other service providers. In some cases, a repair might be covered by the Apple warranty, an AppleCare plan, or consumer law.

How do I update my Beats Pill app?

Then, download the Beats Pill+ app and follow the onscreen instructions to update your firmware. If you have an Android device, download the Beats app for Android from the Google Play store to update your firmware.

What to do if your beats product is no longer available?

If your product needs a different service than the one you requested, we’ll contact you with more information. Hardware service may no longer be available for older Beats and Monster-branded products. Contact your local provider to inquire about available service options. How long will it take?