Is Corrosion x good for guns?

Is Corrosion x good for guns?

CorrosionX® is the ultimate cleaner, lubricant and protectant for firearms of all kinds and in all conditions: black powder, high-volume semi / full-auto fire, suppressed weapons, concealed carry, extreme hot / cold / dirt / wet outdoor environments, and when going for long periods of time between cleaning and …

How do you use CorrosionX?

For CorrosionX Heavy Duty, brush it onto the item to be treated or use our Handi-Spray. For corrosion protection only: Leave the CorrosionX on the metal surface for a few minutes and then wipe off the excess. The CorrosionX will form a thin film on the metal to provide superior corrosion protection.

Does CorrosionX really work?

CorrosionX is by far the best corrosion and rust inhibitor out there. We had quite a few things that were beginning to corrode/rust due to saltwater intrusion and we quickly wiped and sprayed down what we knew we could save with CorrosionX and it actually took a lot of, if not all of, the rust and corrosion away.

Is CorrosionX toxic?

Use CorrosionX with confidence. CorrosionX is non-toxic, non-carcinogenic, and the pump spray is non-flammable. CorrosionX is an outstanding value. One spray penetrates further and faster and lasts longer than any other lubricant or penetrant you’ve tried.

Is CorrosionX flammable?

Corrosion-X is not flammable, all other standard products like WD 40, CRC, Wuerth and many more are VERY flammable. Corrosion X is safe to 36.000 Volt, even CX HD is safe to 25.000 Volt.

Is CorrosionX like wd40?

Is CorrosionX like WD 40? – Corrosion Control Europe. WD 40 is a good WD (water displacer). But that’s as far as it goes. CorrosionX is a better lubricant and penetrant while protecting for a much longer period of time.

Does WD-40 remove corrosion?

WD-40® Multi-Use Product protects metal from rust and corrosion, penetrates stuck parts, displaces moisture and lubricates almost anything. It even removes grease, grime and more from most surfaces.

Is WD-40 anti corrosive?

WD-40 Specialist Long-Term Corrosion Inhibitor is an anti-rust spray ideal for preventative maintenance and use in extreme environments such as high humidity. It provides non-drying protection that stays where you spray it….

Ships fromShips from
Sold by

What do you need to know about Corrosion X?

Expect simply amazing performance from Corrosion-X for eliminating and preventing rust no matter what level of humidity you deal with. Keep at least a can or two in your supplies for when you need to remove rust or keep a new item from rusting. Love this stuff but get the aerosol can instead!

How does corrosionx protect against rust and corrosion?

CorrosionX actually kills existing rust and corrosion (keeping it from spreading), and provides long-term protection against rust and corrosion on any metal surface. CorrosionX is the only product readily available to the public that meets the U.S. Navy’s tough new corrosion prevention and control performance requirement MIL-PRF-81309H.

What can I use corrosionx on to disassemble?

Use CorrosionX on sheaves, hinges, locks, cable/wire rope, windlasses or any metal part needing lubrication. CorrosionX penetrates faster and further than any penetrating fluid you’ve ever used! Corroded or rusted nuts, bolts or fittings can usually be disassembled within minutes.

What makes corrosionx different from other corrosion inhibitors?

Although it may look similar to other oil-based anti-corrosion sprays, CorrosionX utilizes revolutionary Polar Bonding ™ and Fluid Thin Film Coating (FTFC™) technologies that together do far more than merely slow down the corrosion process like those so-called ‘corrosion inhibitors’.