Is acrylic lacquer good for guitars?

Yes, acrylic does dry faster than nitrocellulose and I think it would be a good choice for a guitar finish. It also doesn’t yellow – a plus or a minus depending on your view of relics – and produces a less brittle, more flexible finish. It is more expensive than nitro though.

Is acrylic lacquer the same as lacquer?

Acrylic lacquers CAB-acrylic lacquer dries to a less brittle and more flexible film than that of nitrocellulose lacquer. Otherwise, the working properties are much the same: it is best applied by spray equipment, diluted with regular lacquer thinner to obtain the ideal spraying viscosity, and it is fast-drying.

What is acrylic lacquer?

Acrylic Lacquer is a premium Automotive formulation designed to give a lustrous durable finish. Our formula dries quickly, has superior adhesion to metal, and dries to a high gloss sheen. Once dry, it can be machine or hand buffed for an even glossier appearance.

Does acrylic lacquer melt into itself?

That said, acrylic isn’t a perfect substitute. Waterbornes won’t melt in; this makes finishing more time-consuming and repairs more difficult. You must scuff-sand each coat to ensure a good bond.

What brands of guitars are finished with nitrocellulose lacquer?

Which Guitars Have Nitro Finishes? These days, this type of guitar finish is used almost exclusively by Gibson and Fender’s Custom Shop divisions. As these departments mostly produce premium time-honoured instruments, they therefore use nitro finishes to recapture the essence of their older vintage models.

Is lacquer the same as nitrocellulose?

Nitrocellulose was adopted quickly by the car industry and remained the finish of choice through to the late-1950s. Furniture and musical instrument manufacturers also switched to nitrocellulose lacquer, and mostly it was referred to simply as ‘lacquer’.

How good is acrylic lacquer?

When it comes to acrylic lacquer paints, they are fast drying formulas that provide a glossy finish. These paints are also resistant to chipping and fading. As a general guideline, they have to be mixed with a lacquer thinner so they’re easier to spray.

What are the disadvantages of varnish?

Disadvantages of Varnish The disadvantages of wood varnish include drying too slowly, being difficult to clean up, susceptibility to dust buildup, discoloration over time, incompatibility with water-based products or lacquer, and issues repairing or stripping it, according to Lee’s Wood Projects.

Can you use acrylic lacquer on a Nitro Guitar?

Many current nitro formulas contain up to 25% “plasticisers” anyway, so it’s quite possible that if you buy a new nitro finished guitar it’s finish will not be the same, nor transmit sound the same, as an original nitro finish from the 40’s or 50’s. Personaly I’ve used nitro, poly, acrylic]

What kind of lacquer does a Fender guitar use?

Fender also experimented with acrylic during this period, but nitrocellulose was generally favoured for finishing guitars as it could form a nicer gloss. Regarding its content, nitrocellulose lacquer is mostly solvent-based and comprised of plant-based substances like cotton, mixed nitric and sulfuric acids.

What kind of Finish do you use on a guitar?

Here is an overview of the two main finishes used in guitar building as well as their strengths and weaknesses: Lacquer Finishes. Lacquer is a pretty general term that actually describes a few different finishes. Typically, when it comes to guitars, the type of lacquer used is either nitrocellulose or acrylic.

Which is better for guitar finish acrylic or nitrocellulose?

Yes, acrylic does dry faster than nitrocellulose and I think it would be a good choice for a guitar finish. It also doesn’t yellow – a plus or a minus depending on your view of relics – and produces a less brittle, more flexible finish. It is more expensive than nitro though.