How do you thread a bobbin on a sewing machine?

How to Thread a Bobbin

1. Start with an empty bobbin and a spool of thread.
2. Begin passing thread into the bobbin winder.
3. Secure the thread.
4. Insert the bobbin onto the bobbin winder shaft.
5. Secure the bobbin.
6. Begin winding.
7. Confirm that your bobbin is tightly wound.
8. Load your wound bobbin into its case.

Where does the bobbin thread go?

The bobbin thread is looped around the upper thread and can be pulled up. Carefully pull the upper thread upward to pull out the end of the bobbin thread. Pull up the bobbin thread, pass it under the presser foot and pull it about 10 cm (4 inches) toward the back of the machine, making it even with the upper thread.

Why can’t I get my bobbin to thread?

First, make sure the bobbin-winding spindle (located on top of your machine) has been pushed back to the left for sewing. If it is not in the correct position, the needle will not go down and pick-up your bobbin thread. If the timing is out, the needle thread is not meeting the bobbin thread in time to form a stitch.

Do you put the bobbin thread through the needle?

Thread from the spool goes through the needle’s eye. Thread from the bobbin comes up through the needle plate.

Does the bottom bobbin thread go through needle?

Threads on a Sewing Machine There’s also the thread from the bobbin. It’s located at the bottom of the sewing machine. This thread comes up through the needle plate. Thread from the spool goes through the needle’s eye.

How do you wind a thread in a Toyota sewing machine?

Place spool on tap and cap 3. Draw thread from the spool, guide thread around the thread guide 4. With AISIN facing upwards, insert the thread through the holes on the bobbin, from inside to the outside 5. Place the bobbin with AISIN facing up, on the bobbin winder spindle and click it to the right 6. Hold the thread and depress the foot control.

How do you load a bobbin thread on a sewing machine?

And using the hand wheel on the right, you’re going to twist it towards you to send the needle down, and back up, and then you’ll kind of tug on this thread, and there is a bobbin thread. They’re two different colors, so you can see this one is the bobbin thread and the purple is the needle thread.

Where can I get the correct thread for my sewing machine?

Visit a local dealer or a reputable online dealer to get the bobbin that is correct for your machine. Order extra bobbins for your machine so you can have bobbins ready to use when you change the color thread on your sewing machine. Thread labeled “bobbin thread” in stores is a very lightweight thread used for machine embroidery or machine basting.

Where does the drop in bobbin go on a sewing machine?

A drop-in bobbin is a bobbin that is placed from the top or directly under where the fabric would be while you are sewing. A drop-in bobbin also has a threading pattern that must be followed for the upper thread to form stitches with the bobbin thread.