Popular tips

How do you cut a drawing in half in SolidWorks?

How do you cut a drawing in half in SolidWorks?

(Drawing toolbar) or Insert > Drawing View > Section. In the Section View PropertyManager, click Section or Half Section. You can use Tab to switch between Cutting Lines in Section or Half Section. After you select and place the cutting line in the drawing view, the Section View popup displays.

Can you make a part from a drawing in SolidWorks?

You can import a 2D drawing directly into a sketch in a part document for conversion into a 3D model. To import a drawing into a part document: On the Document Settings tab, select Import this sheet and to a 2D sketch. …

How do I show only sections in SolidWorks drawing?

In a drawing view, click Section View (Drawing toolbar) or Insert > Drawing View > Section. In the Section View PropertyManager, click Section. In Cutting Line, select Auto-start section view.

Can you slice in SolidWorks?

You can use the Slicing tool to create 2D sketch sections that are at the intersection of the source geometry and a reference plane. The Slicing tool creates 2D sketches and sketch planes at the intersection of a reference plane and standard SOLIDWORKS BREP geometry, mesh BREP geometry, and graphics bodies.

How do I cut a surface in SolidWorks?

To cut a solid body with a surface or plane: Edit the solid body: In the FeatureManager design tree, click the solid body and click Edit Part. The Edit command might vary depending on the feature you select. Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface.

How do you draw a 2D drawing in Solidworks?

How to make a 2D drawing in SOLIDWORKS

  1. If the part/assembly is open, select Make Drawing from Part/Assembly in the New flyout menu.
  2. Select Drawing to use a default template.
  3. Click OK.
  4. Select a sheet size and format.
  5. Select a standard view orientation.
  6. Begin a SOLIDWORKS 2D drawing.

How do you exploded view into drawing in Solidworks?

In the drawing:

  1. Insert a model view of the assembly using the orientation needed for the exploded view. For details, see Model View.
  2. Right-click the drawing view and click Properties.
  3. In the Drawing View Properties dialog box, under Configuration information, select Show in exploded or model break state.

How do you move a section view in Solidworks?

To move a drawing view, use one of the following methods:

  1. Click and drag an entity (including edges, vertices, cosmetic threads, and so on).
  2. Select a drawing view, then move (nudge) it with the arrow keys.
  3. Press Alt, place the pointer anywhere in the view, and drag the view.

Where is view on solid works?

(View toolbar) or View > Display > Section View. Define a section view by selecting one, two, or three planes or planar faces. Define a section view by selecting one or more zones.

How to do a partial section view in SolidWorks?

Click Section View. ( Drawing toolbar), or Insert > Drawing View > Section. To create a section view manually, click Edit sketch to display the Insert Line PropertyManager. Sketch a section line. Click to place the view. Also asked, what is a partial section? A section consisting of less than half a section is called a PARTIAL SECTION.

How to create a multi line drawing in SolidWorks?

To create a multi-line section view, or to use a centerline as the section line, sketch the section line before clicking the Section View tool. Multiple section lines can have the same label. A warning message appears if the drawing standard you are using does not allow it.

How do you create a section view in drawing?

You create a section view in a drawing by cutting the parent view with a cutting, or section line. The section view can be a straight cut section or an offset section defined by a stepped section line. The section line can also include concentric arcs. You can also create section views in models to populate the View Palette.

Can a drawing have more than one section?

Multiple section lines can have the same label. A warning message appears if the drawing standard you are using does not allow it. If the section line does not completely cut through the bounding box of the model in the view, you are asked if you want this to be a partial section cut.