How do I reset my Whirlpool top load washer?
How do I reset my Whirlpool top load washer?
Rotate your dial until you have the following three lights illuminated: RINSE, WASH, and STOP. Then turn off your washer and unplug it for ten seconds. When you turn it back on it should be reset.
Why does my Whirlpool washer not start?
One reason your appliance may not start is that it has simply come unplugged or that the outlet that it is plugged into has tripped your home’s main circuit breaker. If you notice a tripped breaker, leave the breaker off and carefully inspect the electrical outlet and power cord for any sign of a problem.
How do you clear a Whirlpool washer code?
To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.
What does Whirlpool diagnostic mode do?
The washer’s diagnostic mode can be used to troubleshoot washer problems by viewing logged washer errors, performing an automatic diagnostic cycle, or manually turning on and off different washer parts to test for proper operation.
How do I read a whirlpool error code?
Error Codes in my Whirlpool Front Load Washer
| Error Code | Error |
|---|---|
| Sud or Sd | There are too many suds in the washing machine. |
| F5 E2 | The door is not locking properly. |
| F7 E1 | Indicates a motor speed sensing error, |
| F8 E1 or LO FL | The washer is sensing a low flow of water. |
What does whirlpool diagnostic mode do?
How do you fix a Whirlpool washer that won’t start?
Troubleshooting When Your Whirlpool Front Load Washer Won’t Start
- Washer is unplugged: Make sure the power cord is plugged in to a functioning outlet.
- Tripped circuit breaker: Check for tripped breakers in your home’s circuit breaker box, resetting any as needed.
How do you reset the code on a Whirlpool washer?
How does the Whirlpool smart top load washer work?
Set your washer to soak for 15, 30, 60 or 120 minutes, then the washer will add water and detergent for soaking. The cycle will start automatically once soaking is complete. Get more water to help break down loose soils. This option lets you customize the water level to various depths so heavily soiled clothes get an optimal clean.
How to submit generic form for Whirlpool top load washer?
Generic form submit error message if an error response is not returned or is empty but an error has occured. Link Example Product Overview Soak, scrub and wash all in one spot with a built-in faucet and pretreat brush in this Whirlpool® top load washing machine.
What makes a whirlpool 2 in 1 agitator so good?
The industry-first 2 in 1 Removable Agitator lets you customize any load. The Load & Go™ XL dispenser lets you skip adding detergent to every load. Fit more clothes in a single load with a 5.0 cu. ft. capacity. Wash and dry in one appliance so you don’t have to interrupt your routine to transfer clothes.