How do I make my pants smaller in my legs?

Steps

1. Turn the pants inside out and put them on.
2. Pinch the edges of the pants where you want to taper them.
3. Have a friend draw a line where you want a new seam to be.
4. Insert pins and then draw a line if you don’t have anyone to help you.
5. Lay a pair of tapered trousers over the trousers you want to taper.

How do you take in a pair of jeans in your legs?

How To Take In Jeans Tutorial

1. Supplies:
2. Put your pants on inside out.
3. Pinch and pin up along your hips stopping at the waistband, we’ll do that part later.
4. Carefully take off your pants.
5. Starting at the crouch, sew down your inseam all the way to the end of your tapper.
6. Sew a seam down the outside of pant leg.

How can I make my pants shorter without sewing?

If you don’t have a sewing machine or needle and thread, you can hem your pants with hem tape, which you can find at most drugstores. To use hem tape, turn your pants inside out, fold them to the desired length, pin and iron the crease, and then apply the hem tape to the fold. Iron over the folded edge.

Can you temporarily hem pants?

If you’re feeling industrious, do a temporary hem stitch. Turn your pants inside out and pin them to the desired length. Using a thread that’s about the weight of your pant, sew in a looping motion through the hem and the inner part of your pant, until you’ve mended the entire hem.

How to shorten pant legs without cutting the bottom hem?

Flip the unstitched part of the cuff back inside the pant legs, leaving only the newly stitched bottom hem showing on the outside. Slip an iron inside each pant leg, creasing down the part of the cuff that is now inside. Iron the outside of each pant leg, pressing the hem firmly down. Try on your newly shortened pants.

What’s the best way to shorten a pair of pants?

Start by laying the pants out on a hard, flat surface. If the glue doesn’t want to come out of the tube, use a small nail to clear the way. Spread the glue across one side of the original hem. Do both legs, one at a time: Fold the pant legs over themselves, like you’re making a cuff or rolling them up.

How can I make the legs of my pants narrower?

In a few simple steps you can make the pants legs narrower 1. Pin the legs of the pants to the desired width. You can have someone else do the pinning for you. If you don’t have someone to pin it helps if you have a pair of pants that already has the desired leg width that you want.

What’s the best way to taper pant legs?

If you don’t have anyone who can help you by drawing a line where you are pinching, you can also insert pins into the areas where you want to taper the pant legs. Insert a pin about every 1 to 2 inches (2.5 to 5.1 cm) where you want to taper the pants. Then, draw a chalk line along the inner edges of the pins after you remove the pants.