Does Tough Coat yellow?

Our Tough Coat uses 100% pure acrylic resin and is perfect as a sealer for high traffic surfaces such as table tops, seating, doors and floors. It dries to a satin finish. Unlike most of our competitors, it is non-yellowing.

Is Tough Coat waterproof?

It is a waterproof, non-porous surface which is why you don’t need a top coat. Tough Coat™ uses only 100% acrylic resin and is perfect as a top coat sealer for those high traffic surfaces such as table tops, seating, doors and dries to a matte finish.

Can you put Tough Coat over wax?

Step 3) Apply Tough Coat It’s better to wait until the first coat is fully dry before you do touch ups or you can add texture and streaks to the finish. Please note: NO wax should ever be used underneath Tough Coat.

How long does it take Fusion tough coat to cure?

Enhance your purchase

Does Fusion tough coat yellow?

Fusion Tough Coat is a premium, non yellowing poly that provides extra durability against general wear and tear, water damage and food stains. Perfect for those high traffic surfaces such as table tops, seating, doors and floors. Dries to a matte finish. Easy clean up with soap and warm water.

Can you paint over a top coat?

No. Like I said, you can paint over clear coat but you’ll need to sand off a layer of the clear coat before applying paint. If you want to paint over clear coat, get out your sanding block and wet sandpaper first! After sanding is done, you can safely apply two or more layers of color.

Can I paint over Fusion top coat?

Important to note: You can easily paint over it anytime if you change your mind. More tips about our Tough Coat. Be sure to gently mix your Tough Coat prior to using it as the matting agent and other ingredients may settle to the bottom.

Do you have to seal fusion mineral paint?

Fusion Mineral Paint is a 100% acrylic paint with a built-in topcoat made from 100% resin. This means you do not need to seal it with an additional product to ensure that it is waterproof. Fusion Mineral Paint is dry to the touch after 2 hours and can accept a re-coat of paint after 2 hours.

What kind of paint do you use on a top coat?

There are many different types of topcoats, and each is a little different.

• Polyurethane. Polyurethane is most typically used on stained wood and gives a very durable finish.
• Velvet Finishes Protect. My new favorite furniture paint is Velvet Finishes.
• Furniture wax.
• Polycrylic.
• Clear topcoat spray.
• Some glazes.

What kind of resin to use for tough coat?

Tough Coat™ uses only 100% acrylic resin and is perfect as a top coat sealer for those high traffic surfaces such as table tops, seating, doors and dries to a matte finish. Fusion™ Tough Coat™ differs from our competition with its use of pure non yellowing acrylic.

What are the keys to applying tough coat?

As you can see, the Fusion™ Tough Coat™ maintains its clear transparency while the competitor brand yellowed. The keys to applying Tough Coat™ to your projects are: Use sparingly and work quickly as it dries fast! When applying, do not pass over the same area more than 2-3 times.

What’s the best wipe on sealer for poly?

Perfect for those high traffic surfaces such as table tops, our non-yellowing water-based wipe on sealer, easily applied with a damp cloth and dries to a matte finish. 500 milliliters covers about 75 square feet. Clean up is easy with soap and warm water. Ensure the Poly is well mixed prior to use, but do not shake.

When do you need a tough coat of paint?

Sometimes though, you may want a slight sheen and added colour vibrancy, or you may want the peace of mind of an extra bit of protection over high traffic areas such as kitchen cabinets or table tops. This is where our Tough Coat™ comes into play!