Are SuperPro bushes any good?
Are SuperPro bushes any good?
If you’re looking for better driving performance, direct steering, long service life, sharper and more responsive handling, then SuperPro poly bushings are the best solution. SuperPro polyurethane bushings in off road conditions do not suffer, firstly because they are designed to suit the vehicles application.
How much does it cost to replace suspension bushes?
The cost to replace front suspension bushes averages £172.50 with rear suspension bushes coming in around £137. The mechanic’s cost to replace suspension bushes is approximately £80 to £230. Total costs to replace suspension bushes (inclusive of labour) ranges between £384 to £650.
How long do Poly bushes last?
Summary
| Polyurethane Suspension Bushings | Rubber Suspension Bushings | |
|---|---|---|
| Hardness | Harder and less pliable | Softer and more pliable |
| Lifespan | Life of vehicle | Same as original bushing |
| Squeaking | Small chance of squeaking | No chance of squeaking |
| Maintenance | Greasing every 4-5 years | None |
Are Nolathane bushes better than rubber?
Unlike rubber, Nolathane polyurethane suspension bushings are not bonded by compression. Nolathane bushings are mechanically fitted with minimal crush of the urethane material, and the centre pin is lubricated so the component freely pivots without restriction.
Are poly bushes worth it?
As they don’t rot or deteriorate, they often outlast the vehicle they’re put on. For anyone looking to upgrade their suspension, poly bushings are a great choice. Here’s how poly stacks up against rubber: Ride Quality: Due to their hardness, polyurethane bushings often lead to a bumpy ride.
Should you grease poly bushes?
“You need grease to fit a Polybush” Many think grease is required to fit our bushes, this is not recommended. The bushes are designed using an interference fit and created to spec. By using grease in the application the bush will rotate within its housing and in effect will turn the bush into a bearing.
Where is SuperPro suspension bushing and suspension bushes located?
SuperPro is an innovative Australian manufacturer of automotive polyurethane suspension bushings and suspension parts based in Brisbane, Australia. These specially formulated, high-quality components are designed to create suspension solutions for better stability, handling and control in on-road, off-road and race track applications.
Can a SuperPro bushing be used for droop?
This can be achieved with a SuperPro alignment correction bushing kit or a SuperPro Adjustable Upper Control Arm Kit. In some cases a suspension bushings will not be able to correct the alignment issues that arise when you lift you vehicle, such as droop.
What kind of material is SuperPro bushing made out of?
SuperPro bushings are made from a proprietary polyurethane mix, tested and refined over 40+ years to suit Australia’s harsh conditions. Using a team of highly skilled suspension technicians and engineers, SuperPro creates some of the best and most innovative suspension bushing products.
Who is SuperPro and what do they do?
SuperPro is an innovative Australian manufacturer of automotive polyurethane suspension bushings, control arms, sway bars and other suspension components for both 4×4 and performance vehicles. SuperPro is based in Brisbane, Queensland and does all engineering and manufacturing on site, ensuring the best quality product.