How do I reset my Cisco IP Phone SPA504G?
How do I reset my Cisco IP Phone SPA504G?
The process to reset a Cisco SPA504G IP phone back to default is a simple task. To reset a Cisco SPA504G back to default, press the Setup button. Once in the setup menu, navigate to menu #14 called Factory Default. Press select and then Ok to confirm your request to reset the phone.
How do I reset my Cisco 7911 to factory settings?
Step 1 Unplug the power cable from the phone and then plug it back in. The phone begins its power up cycle. Step 2 While the phone is powering up, and before the Applications Menu button flashes on and off, press and hold #. Continue to hold # until the message LED on the handset flashes on and off in sequence in red.
How do you factory reset a Cisco phone?
Cisco 7940 / 7960 phone Factory Reset: Press 123456789*0# within 60 seconds after the Headset, Mute, and Speaker buttons begin to flash. If you repeat a key within the sequence, eg: 1223456789*0#, it is still accepted and the phone resets.
How do I factory reset my SPA303?
You can reset Cisco SPA302, SPA303, SPA501G, SPA502G, SPA504G, SPA508G, SPA509G, SPA512G, and SPA514G phones by following the steps below:
- Press the Menu button.
- Press Setting.
- Navigate down to Factory Reset option.
- Press select.
How do I reset my Cisco SPA525G2?
Factory Reset on the SPA525G and SPA525G2 IP Phones
- Press the Setup button on the phone.
- Use the navigation keys and scroll down to Device Administration.
- In the Device Administration page, scroll down to Factory Reset option and press the Select key to factory reset the IP Phone.
How do I setup my Cisco IP Phone SPA508G?
To Set Up a Cisco SPA508G:
- Plug in the phone to both power and Internet.
- Press 9 on the keypad.
- Click HERE to open the provisioning site in a web browser (Internet Explorer, Firefox, Chrome, etc.).
- Select the Cisco SPA508G phone model from the list toward the top of the page.
How do I configure my Cisco IP Phone 7911?
Cisco 7911
- Press the Settings key.
- Press 3 – Settings.
- Press 2 – Network.
- Press **# to unlock the phone.
- Press 7 – Admin Vlan (Virtual Local Area network) (Telephony Vlan)
How do I reset my Cisco 7942 to factory settings?
Resolution/Steps
- Unplug the power cable from the phone and then plug it back in. The phone begins its power upcycle.
- While the phone is powering up, and before the Speaker button flashes on and off, press and hold #.
- Release # and press 123456789*0#.
How do I factory reset my IP?
How to Reset IP Address On Windows computer?
- You have to first click on the Start > Run.
- Now you have to type the command of ipconfig /release and then press Enter.
- Now you have to type the command of ipconfig /renew and then press Enter.
How do I factory reset my SPA525G2?
How do I reset my Cisco 508?
Factory Reset
- On the phone press the setup button.
- Use the directional pad and go down to Factory Reset.
- Click OK to perform the factory reset, the phone should now reboot and default back to the factory default configuration.