Popular tips

Who makes masterforce miter saw?

Who makes masterforce miter saw?

Masterforce is the house brand for Menards. I have several Masterforce power and non-power tools and find them quite good.

What can you cut with a 10 inch sliding miter saw?

A saw with a 10-inch blade makes right-angle cuts across a board 5 1/2 inches wide, sufficient for two-by-six lumber. The same 10-inch saw will cut a two-by-four at a 45-degree angle. Manufacturers also make 12-inch versions, which have a maximum cut of about 7 1/2 inches, wide enough for two-by-eights.

Are masterforce blades good?

Masterforce strays from the standard tungsten carbide tooth design and goes with titanium carbide. With a no-load speed of 4800 RPM, this saw cuts smooth and the blade leaves a surprisingly nice finish for a stock blade. The guard action is nice and smooth as well.

How much can a 10 inch sliding miter saw cut?

Saws start to differ when you look at their blade diameter—commonly 10 inches or 12 inches. The bigger the blade, the deeper and wider its maximum cut. Typically, a 10-inch miter saw will cut a 2 x 6 at 90 degrees and a 2 x 4 at 45 degrees; a 12-inch miter saw will cut a 2 x 8 at 90 degrees and a 2 x 6 at 45 degrees.

What is a dual bevel sliding miter saw?

Dual-Bevel Compound Miter Saws. The blade angles of a dual bevel miter saw can adjust to both the left and right, as opposed to just one side, like the single bevel saw. Double bevel miter saws allow you to make precise and uniform cuts on both sides of your workpiece.

Can a 10 inch sliding miter saw cut a 4×4?

A 10 inch miter saw will cut through a 4×4 piece of wood perfectly. However, you cannot cut in one go. If you are using a stationary saw, you will have to flip over the material and cut it from the other side. If you want a miter saw that can cut through a 4×4 in one go, then a 10-inch size is not the ideal one.

Can I use a 10 inch blade on a 12-inch miter saw?

You can put your 10-inch blades on your 12-inch saw (assuming the arbor holes are the same size), but you cannot put 12-inch blades on a 10-inch saw. The 12-inch saw gives you greater versatility – with the larger blade, it’s the hefty workhorse, and with the smaller blade, it’s a master of precision.

What is the benefit of a sliding miter saw?

Sliding compound miter saws have all the versatility of compound miter saws and a sliding feature, similar to a radial arm saw, allowing you to move the blade forward and backward. The major advantage of the sliding feature is the increased length of cut it provides.

What is a good cheap miter saw?

Best Budget Miter Saw Reviews

  • DEWALT DWS715 12-Inch Compound Miter Saw.
  • Metabo HPT C10FCGS Compound Miter Saw.
  • SKIL 3821-01 12-Inch Quick Mount Compound Miter Saw with Laser.
  • Delta Power S26-262L Compound Miter Saw.
  • Tracklife 15 AMP 10-Inch Sliding Compound Miter Saw.

Which is the best sliding compound miter saw to buy?

There are lots of miter saws on the market, the ability to select the best sliding compound miter saw is same as a beginner, or choosing a miter saw for your first project, the below guide will give you a thorough explanation and excellent view on how to select the right tool. Which Are The Best Sliding Compound Miter Saws?

What kind of warranty does a shopmaster miter saw have?

This Shopmaster 10 in. Slide Miter Saw is made by Delta Power Equipment and comes with a 3-Year Warranty. There is 1 sliding miter saw per package. The unit includes a dust collection bag and a work clamp. A built-in laser lets you know where the cut will be made. You will need Adobe® Acrobat® Reader to view PDF documents.

Is the Festool kapex a sliding miter saw?

While sliding miter saws aren’t known to be light, compact or portable. The Festool Kapex is designed with portability in mind. When transported, the blade is locked down and due to its design, the center of gravity remains close to your body, minimizing the strain on your back when carrying it around.

Which is the best miter saw for crown molding?

This is a single bevel miter saw thus it bevels 48 degrees to the left. 14 positive stops on the stainless steel miter detent plate allow you to make easy and precise cuts. It can handle crown molding up to 5-¼ nested and baseboards up to 6-½ against the fence.