How much does a power post driver cost?

Hydraulic post drivers can run thousands of dollars, while pneumatic, air-driven models range from $450-$2,500. Labor costs vary across the country, but generally speaking paying someone to drive 1,300 linear feet of fence post would run $6,000.

How far apart should T posts be?

between 8-12 feet
In general, T-posts are spaced between 8-12 feet apart, depending on what you’re trying to contain or keep out. Closer spacing is suggested for large livestock, like cattle, while wider spacing is fine for fending off deer and other large pests. How many clips per T-post do I need?

How long is at post driver?

The driver is 78 inches long overall and weighs 30 pounds. The 38- inch-long barrel, which is 2 inches in diameter, allows a 36-inch stroke. The 13⁄8-inch-diameter handles extend down from the lower section of the barrel. Design drawing MTDC–1026, Post Driver PD–2, is available from MTDC.

What is an air post driver?

Air post drivers are ideal for driving fence posts, channel posts, ground rods, beams, and stakes in both open space and hard to reach locations. With a maximum air requirement of 64 CFM at a pressure of 100 PSI and a peak weight of 138 lbs., air fence post drivers feature fact, one-man, or two-man operation.

What is a hydraulic post driver?

Hydraulic Post Drivers Hydraulic post drivers operate using levers to pound the post into the ground. They have various controls that move the driver in different directions to make sure the post is placed into the ground levelly. They are often bulky, so it’s helpful to take that into consideration when deciding if that would be your best option.

What is a postal driver?

A post driver is a device used to set poles or posts into the ground. The post driver applies force to the top of a fence or sign post, which drives it into the earth without the need for digging. While traditional post setting requires the use of a heavy hammer and plenty of hard labor, post drivers require very little manual labor.