How much boost can a stock CA18DET take?

look its all in the turbo you can be at 10 psi on a t2 and be at 10 psi on a t4 and the t4 will make more power.

How much horsepower can a CA18DET handle?

so …from what i see, if everything is spot on, you can go to 300-350hp with no issue. but it is never spot on, so i consider 1.2bar with a T28 turbo is the max the internals can cope with if you dont want trouble. this is about 300hp.

Is the CA18DET a good engine?

Scores & conclusion. The CA18DET has shown that it offers some decent tuning potential out of the box however when put under the stress of drifting the well documented issues with big end bearings wearing out and bricking the engine make it a less then perfect drifting powerplant.

How much boost can a stock sr20det handle?

From everything I’ve read the stock bottom end of the SR20 will handle around 20-23 psi as long as your make sure your fuel delivery system and intake temp is in check. I, however, wouldn’t count on it lasting too long at that pressure. 15 psi is a safe boost level that will keep your car running for a long time.

How much power does a CA18DET make?

The CA18DET was able to produce 166 bhp with 168 lb-ft of torque, and in more ways than one represented a significant upgrade from previous models. Some of its enhancements included: A new DOHC aluminum head with 16 valves. An upgraded Garrett T25 turbocharger with better flow capacity.

How reliable is CA18DET?

Re: CA18DET reliability The answer is “Yes” to all of your questions. It is a reliable motor, but if you get the bigger T28 with bigger backhousing and plan on running stock boost, you will not be happy. If you plan on running stock boost forever, then stick to the stock T25 and enjoy.

How much power can a stock SR20 block handle?

The stock engine, without cracking the valvecover, should hold around 400-410whp with the proper upgrades to fuel/turbo, etc… If you put a metal head gasket and head studs, you should be able to crank out 550whp or so, if it’s tuned correctly. However, 400whp is plenty enough for a daily driven FWD car IMO.

How much horsepower can a SR20DET make?

When built properly, the SR20 can reliably support more than 700 hp at the wheels. For those seeking a reliable, cost-effective engine swap that is practically a drop in for the S13 and S14 240SX, look no further.

Which is better the Nissan SR20DET or the CA18DET?

Beyond that, the SR20DET also contains a much-updated turbo, the ball bearing T28, while the CA18DET uses the T25 as stock. We only give a slight advantage for the SR20DET for three main reasons.

What kind of engine does the Nissan CA18DET have?

Below you’ll find the main engine specifications for the CA18DET: Nissan originally planned to use the CA18DET in its smaller cars. Its many upgraded and enhanced features (as mentioned above), made it a top choice for some of Nissan’s most iconic and beloved models. Below is a full list of all the cars that were built with the CA18DET:

What should I know about tuning my CA18DET?

Broadly speaking, CA18DET tuning can be split into two types – Engine Tuning and Intake/Exhaust Tuning – which we will explore in some more detail below: Before you start tuning your CA18DET, you should think carefully about how far exactly you want to go.

Is the CA18DET S13 200SX available in Europe?

This balance was key to the engine’s prowess. Emissions standards and taxation in Europe meant the CA18DET was the only available engine in the S13 200SX European model.