How do I fix Hotpoint error code F06?

When your Hotpoint washer dryer shows error message F06, you will need to check the door area for any obstructions. Closely inspect the door lock and surrounding areas, removing anything in its way. Once you have cleared any obstructions, try to restart the machine programme.

What does the error code?

When an error occurs in Windows or other software programs, an error code is generated and sometimes displayed to the computer user. The error code is a specific number that identifies what the error is to the system. It also can be helpful in finding a resolution to the problem.

Why is my Hotpoint washing machine flashing?

End light flashing Indicates that the Hotpoint washing machine has reached the end of a wash programme. If the wash, rinse and spin function lights all flash at the same time, this would indicate a possible blockage in your filter or waste / drain pipe.

How do I fix my Hotpoint washing machine F01?

When your washer dryer shows error message F01, we advise you to disconnect and unplug your Hotpoint washer dryer from the mains supply for 3 minutes. After 3 minutes have passed, reconnect your Hotpoint washer dryer and wait 30 seconds before you start up the machine again.

How do you fix a Hotpoint washing machine that won’t drain?

If the washer won’t drain or is not draining properly, and the washer has a coin trap, remove the coin trap and clean it thoroughly. First, check the drain hose to determine if it is kinked, twisted, or bent. If the drain hose is bent, straighten it out. In addition, remove the drain hose and check it for obstructions.

What is the error code for Hotpoint service?

Digital display codes F01 F02 F03 F05 F06 F07 F08 F09 F11 F12 F15 F16 F18

What does the error code F02 mean on Hotpoint?

Please select an error code to reveal the fault and a how to fix it yourself. Created with sketchtool. F02 Issue: Washing Machines is not operating – some or all functions are not selectable. Advice: We recommend you disconnect (unplug) the appliance from the mains supply for a minimum of 2 minutes.

Why is my Hotpoint washing machine saying F05?

The F05 fault code means that you Hotpoint machine’s pressure switch is experiencing problems. Particularly, it is a kind of telling the machine not to spin because it is full of water, although is actually not. It is imperative that the system signals the machine that the drum is free of water before spinning it.

Can a Hotpoint washing machine door be replaced?

If these first two methods do not work I will then show you some other ways for the Hotpoint Washing Machine Door release. Now hopefully you have a fault with the washing machine handle\\lever which can be replaced. With ours it was 7-8 years old and was at the end of it’s useful life so it was time to cut it loose and get a new Washing Machine.