How do I connect my Blu-ray player to the Internet wirelessly?

How do I connect my Blu-ray player to the Internet wirelessly?

Connecting a Blu-Ray Player to Your WiFi Network

  1. Make sure your Blu-ray player and TV are powered on and that your WiFi network is working properly.
  2. Navigate to your Blu-ray player’s main menu screen.
  3. Open Network Settings and then select WiFi Setup.
  4. Select Wireless as your connection type.

Why won’t my Sony Blu-Ray player connect to WiFi?

Power reset your modem/router Unplug the power cable to your modem/router and wait about 60 seconds. Reconnect the power cable to your modem/router and make sure it’s turned on. Wait until the device is finished making it’s connection to the internet and your network. Check if the issue is resolved.

How do I connect my phone to my Sony Blu-Ray player?

From any Android Device

  1. Open the App Drawer.
  2. Go to Settings.
  3. Tap Bluetooth. You may need to select Connections first.
  4. Ensure Bluetooth is On and then select your device from the list below.

Can you mirror Iphone to Sony Blu-Ray?

Apple® devices do not support Screen mirroring. Blu-ray Disc players released in 2013 or earlier do not support Screen mirroring. For all other models, refer to the operating instructions supplied with the product.

How do I connect my Blu-ray player to my Smart TV?

HDMI (In/Out)

  1. Connect an HDMI cable from the HDMI output on your Blu-ray Player, to the HDMI input on your TV.
  2. Make sure the both the Blu-ray Player and the TV are powered On.
  3. Set the Input on your TV to match the input you plugged the HDMI cable into.
  4. That’s all there is to it! You’re done.

How do I connect my Sony blue ray player to Internet?

Connecting a Sony Blu-ray player to the Internet can be very easy if you use a wired connection, but wireless makes it a little more difficult, depending on the exact player you have–most just require a wireless adapter. Turn on the Blu-ray player and go to the “Setup” icon using the arrow keys on the remote.

Why is my Sony Blu ray player not working?

Network Connection Problems. In most cases, a Sony Blu-ray player won’t connect to the Internet with an Ethernet cable if the network you’re connecting to is faulty or experiencing technical difficulty. If the modem is unable to connect to the Internet Service Provider, pressing the “Reset” button on the device usually restores network connectivity.

How do you reset a Sony Blu ray player?

Press the “FF” button on the player — do not use the remote control — and hold it for about eight seconds until the message “Reset” appears on the display, followed by the player turning off. Wait about 10 seconds after the player turns off.

How do you update a Sony Blu ray player?

Turn on the TV the Sony Blu-ray player is connected to and set it up to display the input the player is connected to. Place the disc you created containing the firmware update files in the Blu-ray player. Select “OK” and then press “Enter” when a message appears asking if you want to update your device’s version.